Container series
  Heat transfer equipment series
  Distillation tower
  Reaction kettle series
  Series Granulator
  Series Fluided Bed
  Series Airstream Dryer
  Series Spray Dryer
  Series Vacuum and Conductive Style Dryer
  Series Cabinet Dryer
  Other Fittings & Series MixerM
 
  ADD: No12,Xuejian Road,Xueyan Town,Changzhou,Jiangsu,China
  P.C.: 213169
  Contact:
Wu guoqi   +86-13771095086
  Tang guofeng +86-13915043681
  Tel:+86-519-86163018
  +86-519-81190169
  Fax:+86-519-81190162
  E-mail:market@taileike.com
  URL:www.joyivy.com
  www.tlkchemm.com
 

SZG Series Conical Vacuum Dryer

>> Descriptions
SZG Series conical Vacuum Dryer is a new generation of drying device developed by our factory on the basis of combining the technology of similar equipment. It has two connecting ways, i.e. belt or chain. Therefore it is stable in operation. The special design guarantees two shafts to realize good concentricity. Heat medium and vacuum system all adapt reliable rotating connector with the technology from USA. On this basis, we also developed SZG-A. It can carry out steeples speed change and constant temperature control.
As a specialized factory in drying industry, we supply hundred sets to the customers every year. As for working medium, it may be thermal oil or steam or hot water. For drying the adhesive raw material, we have designed specially a stirring plate buffer for you.The biggst may be 8000L.


>> Principle
Let heat source (for example, low pressure steam or thermal oil) pass through the sealed jacket. The heat will be transmitted to raw material to be dried through inner shell;
Under driving of power, the tank is rotated slowly and the raw material inside it is mixed continuously. The purpose of reinforced drying can be realized;
The raw material is under vacuum. The drop of steam pressure makes the moisture (solvent) at the surface of raw material reach the state of saturation and evaporate. The solvent will be discharged through vacuum pump and recovered in time. The inner moisture (solvent) of raw material will infiltrate, evaporate and discharge continuously. The three processes are carried out unceasingly and the purpose of drying can be realized within a short time.


>> Features
When oil is used to heat, use automatic constant temperature to control. It can be used for drying biology products and mine. Its temperature of operation can be adjusted form 20 -160℃.
Compared to ordinal dryer, its heat efficiency will be 2 times higher.
The heat is indirect. So the raw material can not be polluted. It is in conformity with the requirement of GMP. It is easy in washing and maintenance.


>> Applications
It is suitable for the raw materials that need to concentrate, mixed and dried at low temperature (for example, biochemistry) products in chemical, pharmaceutical and foodstuff industries. Particularly it is suitable for the raw materials that are easy to be oxidized, volatilized and have night heat sensitivity and is toxic and not permitted to destroy its crystal in drying process.

 
 
名门国际娱乐_名门国际娱乐平台_名门国际娱乐平台