Container series
  Heat transfer equipment series
  Distillation tower
  Reaction kettle series
  Series Granulator
  Series Fluided Bed
  Series Airstream Dryer
  Series Spray Dryer
  Series Vacuum and Conductive Style Dryer
  Series Cabinet Dryer
  Other Fittings & Series MixerM
 
  ADD: No12,Xuejian Road,Xueyan Town,Changzhou,Jiangsu,China
  P.C.: 213169
  Contact:
Wu guoqi   +86-13771095086
  Tang guofeng +86-13915043681
  Tel:+86-519-86163018
  +86-519-81190169
  Fax:+86-519-81190162
  E-mail:market@taileike.com
  URL:www.joyivy.com
  www.tlkchemm.com
 

XF Series Horizontal Fluidizing Dryer

>> Descriptions
Fluidizing dryer is also called fluid bed. Through operation and improvement over 30 years, it has play an active part in the fields of
pharmaceutical, chemical, foodstuff, gain and so on industries. It consists of air filter, fluid bed, cyclone separator, dust collector, highspeed centrifugal fan, control cabinet and so on. Because of the difference of property from raw material, it is necessary to equip dust remover in accordance with practical needs. It may select cyclone separator and dust collector both or one of them. In general, cyclone separator can be selected if the raw material is larger and the dust collector may be selected if the raw material is light. Moreover, there is pneumatic feeding device for your selection. There are two kinds of operation for this machine, continuous and intermittent type.


>> Principle

The clean and hot air enters into fluid bed through distributor of valve plate. The wet material is fed from the feeder forms the fluid
state by hot air. Because of the wide contact between hot air and raw materials, the time of drying is short. If use continuous type, the material enters from the front of bed, fluidized in bed for several minutes, and float another side of bed. The machine works in negative pressure.


>> Applications
Drying process of medicines, chemical raw material, foodstuff, grain processing, feed and so on. For example, raw medicine, tablet, Chinese medicine, foodstuff of health protection, drinks, feed, resin, citric acid and other powders. The suitable diameter of raw material is normally 0.1-0.6mm. The most applicable diameter of raw material will be 0.5-3mm.

>> Technical parameters

spec/item
drying capacity kg/h
power of fan kw
air pressure pa
air amount m3/h
Tem. of inlet air℃
Max consume J
Form of feeding
XF10 10-15 7.5 5.5×103 1500 60-200 2.0×108 1.shape valve
2.pneumatic conveying
XF20 20-25 11 5.8×103 2000 60-200 2.6×108
XF30 30-40 15 7.1×103 3850 60-200 5.2×108
XF50 50-80 30 8.5×103 7000 60-200 1.04×109

Notes: the drying capacity is measured based on the primary moisture of crystal of plum is 20% and its final moisture is 5% and the temperature of air inlet is 130℃.The drying capacity of other raw materials will be based on the practical drying condition. When choose models, please note that: Model A should be matched with cyclone separator and Model B with inside bag dust collector and Model C with cyclone separator and bag dust collector.
 
名门国际娱乐_名门国际娱乐平台_名门国际娱乐平台